Clothes Hangers: What You Need To Know

Closet still looks messy after installing a closet organizer? Does it not look as nice as the promotional pictures you've seen? What's the difference? The right hangers can give your closet a neater appearance. Let me show you why and some other tips.

When I was looking around for ideas to design a closet organizer for my coat closet it struck me how my closets didn't look as nice as the product photos even though I have closet organizers installed. I knew my closets wouldn't look as good as those product photos. I mean, my clothes are things I wear, not props I add to make my closet look nicer. But there was one simple and relatively inexpensive thing I could borrow from those staged photos to make my closet more visually appealing. Get new matching hangers!

Your closet is one of the first things you see every day. Having a neat, organized closet that's visually appealing which allows you to quickly find the clothes you want can really help you start off your day on a positive note. At the very least it will be one less frustration in your hectic day.

Imagine you walked into a shop and they had a rack of shirts using a mix of a dozen different types of hangers and the display looked messy. How would it make you feel about the clothes you were buying? When you open up your closet door do you want to feel like you're in a thrift store or a high end retailer where the clothes probably came from?

I have to admit that the aesthetic aspect was one of the driving factors in choosing to replace my clothes hangers but there are other benefits as well such as:
  1. Save space.
  2. Keep clothes from getting wrinkled, crushed or misshaped.
  3. Make it easier to find what you're looking for.
  4. Make it easier to put your clothes away so you don't wind up with your shirts on your footboard and your jeans pilled up in a corner.

Hanger Materials

From a visual perspective, it would be nice to have all the same hangers, but there are some hangers that are better suited to certain types of garments than others while still keeping costs down. My goal is going to be to get all the same type of material for particular types of clothes and have all the hangers at least have a chrome hook for uniformity.

Wire Hangers

Wire hangers are great for all sorts of things. They can help you unclog a sink, fish wire through walls, unlock your car door if you locked yourself out, you can even make an HDTV antenna out of them, and they're a cheap way to transport your clothes from the dry cleaners. They're not so great for your clothes. 

Over the years wire hangers have been getting thinner and weaker. They don't distribute the weight of the garment over a large surface area and aren't always wide enough which can cause indentations in the clothing. Apparently the metal can even discolor some fabrics, which is why when you get your clothes from the dry cleaners, there's sometimes a paper sleeve over the hanger or some cleaners use coated hangers.

Keep some wire hangers around because they can come in handy for different things, but once you get your clothes home from the cleaners, put them on better hangers. On your next trip to the cleaners, bring back your last set of wire hangers and see if they'll take them back so they don't wind up in a landfill. From what I understand many cleaners will accept them.

If for some reason you must have wire hangers (packing in a travel garment bag for instance) these Organize It All Chrome Hangers look nicer and stronger than the ones you get from the dry cleaner.

Plastic Tubular Hangers

These are better for your clothes than wire hangers and most of my closets were filled with them. They're not horrible but over the years you pick up some from the drugstore, the supermarket, and other locations and you wind up with a bunch of slightly different hangers in a rainbow of colors. It destroys the uniformity I'm looking to achieve. 

Getting all new plastic hangers that are the same size and color is an option but it seems like a waste. If I'm going to replace my hangers I want to replace them with something better.

Another problem with plastic hangers is some hangers wind up becoming different sizes and shapes, over time some of the hanger hooks have deformed resulting in an uneven appearance that makes the closets look cluttered. Hanging heavy items, such as jeans, on the bar of the hanger can also cause them to deform as can be seen in the photo above.

Velvet Hangers

These new types of hangers appear to be very popular. They have a chrome hook, which fits with my design goal, and the body of the hanger is a thin plastic that has a flocked surface. Think of the inside of a jewelry box. This velvet like surface provides friction to prevent clothes from slipping. They also have little indentations to hold on to clothes with thin straps so your tanks and spaghetti strap dresses don't wind up on the floor every time you look at them funny. 

They're reasonably priced and have a lot of good reviews. The only big downside is that if you put wet clothing on them it can cause the color of the "velvet" to transfer to your clothing, or otherwise damage the textured coating. I usually hand wash my workout clothes when I'm done with them then throw them on hangers and allow them to air dry. I'm going to need to keep a few plastic hangers around for that.

I purchased some velvet hangers to see what all the rage was about and I have to admit I'm pretty happy with them. I think they will make a good general purpose hanger for shirts and other tops. I replaced some of my plastic hangers with these velvet hangers and there's a big difference in the before and after photos.


You can see that the shirts line up better when they're all on the same type of hanger. The collars and shoulders are more in alignment. The shirts also sit better on the hanger and don't move around when I hang them on the rod thanks to the non-slip velvet texture. It makes it easier to find the shirt I'm looking for and the shirt doesn't slide around as I put it back on the rod.

If you look closely on the back wall of the photo there are CedarSafe Aromatic Eastern Red Cedar Flakeboard Closet Liner Panels. I had just installed these about a week ago. Not so much because I had a moth issue, but because I like the smell of cedar. Every time I open the closet door I'm greeted by the fresh cedar scent which reminds me of being out working in the yard. Something I can't do in the dead of winter. Anyway....

While I had the closet cleared out I had washed and ironed these particular shirts and hung them up carefully (I didn't mess them up for the photo) yet they still look like a mess compared to how they look when transferred to the velvet hangers which I didn't take much care in hanging up.

Velvet hangers claim to save space but I didn't see much in the way of space saving compared to the plastic hangers when the shirts hang naturally. If I compress them they probably take up less space than tubular hangers but I like to give my clothes room so that air can circulate and they don't wrinkle. Even without the space savings the shirts hang much nicer and make the closet look more tidy.

For button down shirts, polos, other tops and light dresses I think I'm going to stick with the velvet hangers. I was so happy with the few hangers I purchased I decided to order another 50 Velvet Hangers because they look and work well and are affordable. Especially when bought in packs of 50. They are available in different colors and in the following different styles:

Velvet Suit Hangers Velvet Shirt/Dress Hangers Velvet Suit Hanger with Metal Clips
General purpose hanger can be used for shirts, jackets, suits, folded pants, etc. Costs less than suit hangers. No cross bar for pants. Good for shirts and other tops and dresses. If you hang your pants or long dresses without folding them to avoid creases, these come with clips.

You can also get Finger Clips separately to add to your velvet hangers that enable you to hang pants and long skirts without folding them.

Wooden Hangers

If you want to feel like you're looking through the racks of a high end clothing store when you're selecting your outfit for the day there's nothing better than real wood hangers. They add a touch of elegance to your closet. People who market closet organizers seem to understand this because every single product photo I've seen for closet organizers used wooden hangers.

They are available available in a number of different colors to match your closets decor as well as unfinished aromatic cedar.

For shirts and other tops these Honey-Can-Do Wood Hangers with Non-Slip Grooved Bar seem like an attractive option. They are available in maple and cherry and are one of the most affordable wooden hanger options I've seen.

They come with a bar for pants and are labeled as suit hangers but some reviewers claimed that the bar wasn't sturdy and just stapled on. Honey-Can-Do offers a limited lifetime warranty on these hangers which does give me some piece of mind. These are very affordable wooden hangers and you're going to have to expect certain things. The finish on them doesn't seem to be applied very well. The finish on the top of the hanger appears to be smooth but on the front and back there are some rough spots. For the price though, they're a very good value.

If you want to purchase a lot of wooden hangers these The Great American Hanger Company 200202-100 Wooden Suit Hangers come in sets of 100 and appear to be good quality at a great price.

The Best Wooden Hangers

The quality of the wooden hangers I mentioned above are adequate and about what you can expect for hangers in that price range. If money is no object and you want the best hand made, hand finished that money can buy visit Butler Luxury. What's surprising about these hangers is how affordable they are. Okay, they're not cheap compared to the wooden hangers above that can go for less than $1 each but compared to other high end hangers from The Hanger Project or Beverly Hangers, they're in the same ball park. That's quite a feat considering the Hanger Project and Beverly Hangers are machine manufactured in China while the Butler Luxury hangers are hand made here in the good 'ol US of A. Check out Gentleman's Gazette for a full review of Butler Luxury Hangers.

I previously made the mistake of thinking that Butler Luxury Hangers were made in the USA but received this information from the Mike Cregan, owner of Butler Luxury.
Our hangers are made in a facility in China.  However, what is true is that our facility is like no other China. Nearly all hanger factories are all in the same area and feed off each other.  Our shop is about 1500 miles from the others, uses highly skilled craftsmen and has  better conditions.  It is the same place where the shop makes hangers  for Prada and Zegna.  It is highly specialized for only cutting edge  quality hangers.  No others.

Hangers Types For Different Clothes

Your standard triangle shaped "suit hanger" can serve most purposes but there are benefits to getting specialty hangers for different types of clothes.

Pant and Skirt Hangers

There are three basic types of pant hangers, an open ended bar hanger, a clip top hanger as well as using clips on a standard suit hanger. You my need more than one type depending on your wardrobe and how you like to hang your pants.

One tip that can be used for all pants hangers though is to hang your pants with the crotch facing the back wall. It helps make everything look more uniform.

Open Ended Pants Hangers

If like me, you fold your pants on hangers, these open ended hangers both look nice and are very functional. 

I ordered a couple dozen of the Jobar Slacks Easy Slide Hangers to hang my slacks and jeans. I was a little concerned by some of the negative reviews on them but the other brands were much more expensive. These are far and away the hangers that made the most difference in my closet and their quality seems very good.


I used to hang my jeans on the bar of plastic hangers and my dress pants usually stayed on the hangers that came from the dry cleaners. The wire hanger with the cardboard tube over the bar seemed to do well to keep the pants from sliding off the bar and onto the floor when I was shuffling through them looking for something to wear.

As you can see though, they looked sloppy and the weight of the jeans would distort them.

The Jobar slacks hangers have a few great benefits.
  • There is a ribbed plastic or rubber sleeve over the bar that provides friction to keep the pants from sliding off the hanger. 
  • The hangers are chrome plated so they match up well with the chrome plated tops of the Velvet Hangers I purchased. 
  • They seem very durable and have no problem holding up heavy jeans. I even put 4 pairs of jeans on one hanger and the hanger could handle it.
  • They can even be used to hang folded sweaters or shirts on the bar better than suit hangers.
  • It's easier to take pants off the hanger and put them back on compared to standard suit hangers. You don't even need to take the hanger off the closet rod.
  • It's easier to see which pants are which because the view isn't obstructed. This is especially helpful for me as I have my pants hanging on the lower half of a double hang rod section.
  • The pants sit up higher off the floor compared to suit hangers which makes a much nicer space below the pants for additional shoe storage. There is enough clearance to easily see the shoes. This alone makes the purchase of the hangers worth the cost in my opinion.
One of the major complaints in the reviews were that they weren't long enough. The Jobar pant hangers I received have no problems holding the size 34 waist pants that I have hanging on them and there's room to spare. The bar is 12" long (13" if you count the bent up end portion) so if you have any concerns fold your pants over a hanger you already own, take a tape measure and measure the width of the pants at the hanger bar. If your pants are too wide to fit on the hangers and you didn't get a small size by mistake, think about exercising more or get rid of the MC Hammer pants.

The specifications for the other hangers (like these Whitmor Chrome and Foam Collection Slack Hangers which have a foam instead of plastic cover) don't seem to be substantially wider than the ones I purchased except for maybe these Closet Complete Foam-Coated Chrome Non-Slip Pants Hangers which might be a little bit bigger. 

Clip Top Pant and Skirt Hangers

If you have at least a  medium hang section of your closet (about 54" of vertical hanging space) you can hang your jeans and slacks without folding them. Simply clip them upside down by the cuffs to a clip top hanger and you're set. Makes it easy to not forget things in your pockets too :)

Skirts and Shorts can also be hung using these types of hangers in double hang sections. Some of my cargo shorts and bike shorts are especially hard to fold and I'm planning on getting clip top hangers for these. I still haven't decided which ones. Either chrome and black ones that match the slacks hangers or wooden ones because the wood will be visible and provide a more pleasing appearance. These are the ones I'm considering.

Suit Hangers 

The main reason I wouldn't use the wooden hangers above for suits is I prefer the curved, wide shoulder suit hangers like these Whitmor Natural Wood Collection Deluxe Suit Hanger. These are the types of hangers that my suits came with. They help preserve the shape of the suit. These are not to be confused with the cheaper contoured wood hangers which have a curved shape but not the wide shoulder pads.

They're not cheap but $15 for a hanger doesn't seem so bad when you're considering you're putting a suit or jacket on it that you paid hundreds or thousands of dollars for. If you have a few suits and jacks I did see these Proman Products Libra Wide Shoulder Suit Hanger w/PVC Ribbed Bar that are less than $6 each when you purchase a set of 12.

The Honey-Can-Do Wood Wide Shoulder Suit Hangers comes in a 2 pack for around $12 but I could only find them in black. The Whitmor Cherry Wood Collection Suit Hanger is less than $7 each currently but I was hoping for a light colored wood. I guess I'd have to spend a little more to get the cherry flat hangers to match.

If the wood hangers seem too expensive, there's always the plastic broad shoulder suit hangers which are a fraction of the cost.

Your suits and jackets should last you a long time if you take care of them and you should invest in decent hangers for them if yours didn't come with proper hangers.

Padded Hangers For Delicates

For delicate fabrics like silk, satin and lace, padded hangers are recommended. They help protect delicate and expensive blouse, lingerie and other items such as sleepwear. They all have similar designs, a hook and a padded arm with a bow in the middle. Some are covered in canvas, others in linen but most seem to be in satin.

They're all very feminine looking but you know what. Us guys can have silk shirts, silk and satin pajamas too. A black set or canvas covered padded hanger might be a little more masculine looking. You can even clip the bow off if you want.
Continue Reading

Coat Closet Revisited

Free woodworking plans for a deep coat closet. Includes ample shoe storage and a bench seat.

I was getting ready to order the lumber for my coat closet organizer but I started having second thoughts about my previous design. The previous design provided a lot of storage for this multi-functional closet but it had some drawbacks. Even though there is plenty of room to store shoes on the shelves I have a feeling they won't be used. There is no place to sit and take your shoes off in very close proximity to the closet which means it's going to be easier to kick of your shoes and just leave them on the floor.

My coat closet is located in front of my stairs which makes it deeper than a typical reach-in closet which makes it a little difficult to plan an efficient layout. I decided to use some of that extra depth to include a bench in the coat closet. It will turn the front coat closet into a small mudroom type closet. It won't be like the other closet to mudroom conversions that are open, this closet will still have a door that can close but still provide the necessary functionality.


The current amount of hanging space is sufficient so the new design will have about the same amount of hanging space for coats with both double hang and single hang poles for larger coats. Shoe storage will be greatly increased by adding 5 18"shoe shelves which should be able to hold 2 pairs of men's shoes or 3 pairs of women's shoes each. Additionally, taller shoe storage is provided under the bench and shelves for boots and other items. The shoe shelves are only 12" deep (instead of the full 16" depth of the shelving unit) to provide a little extra elbow room when seated.

The 2 12" shelves that were installed above the closet rod will be replaced with the 16" deep top shelf, which runs along the entire back wall, and 3 18x16" shelves. This will provide enough storage for the miscellaneous items that wind up in the coat closet because they can't seem to fit in other places. The deeper top shelf will make it easier to store some of the large Rubbermaid totes that are a little too deep for the current closet shelf.

I would have liked to make the shelves adjustable but that would have meant buying a second full sheet of plywood and losing about 3/4" of space for either shelving or hanging which would have been a problem for me.

An upright vacuum cleaner can be stored in the long hanging section or possibly in the corner in front of the double hang section.

The most important change however is the inclusion of a small padded bench. It's a little narrow but big enough to provide a space to sit and take off or put on your shoes.

What You'll Need

Materials

My plan is to use maple for all the lumber. The full sheet of plywood will likely be pre-finished 3/4" maple PureBond.

Tools

Cut List

  • (1) 66-3/4" x 16" 3/4" Plywood Shelving Side
  • (1) 51-1/4" x 16" 3/4" Plywood Top Shelf
  • (1) 42" x 16" 3/4" Plywood Double Hang Side
  • (1) 17-1/4" x 16" 3/4" Plywood Double Hang Top
  • (1) 19" x 10-3/4" 3/4" Plywood Bench Bottom
  • (4) 18" x ~15-7/8" 3/4" Plywood Shelves/Shelving Bottom
  • (4) 18" x ~11-7/8" 1/2" Plywood Shoe Shelves
  • (1) 49-3/4" 1x4 Top Shelf Support
  • (1) 34-1/4" 1x4 Seat Wall Support
  • (1) 33-1/2" 1x4 Seat Front Support
  • (1) 33-1/4" 1x4 Back Wall Support
  • (2) 16" 1x4 Top Side Supports
  • (1) 15-1/4" 1x4 Double Hang Side Support
  • (1) 10-3/4" 1x4 Seat Front Wall Support
  • (2) 9-1/4" 1x4 Seat middle Supports
  • (4) 11-7/8" 1x2 Shoe Shelf Supports

Cut Plan

3/4" Plywood

The main component will be cut out of 3/4" Plywood. You can save a lot of time if you purchase pre-finished plywood. You'll need to make appropriate changes for your particular closet dimensions.

Two rip cuts will be made to produce two strips 16" wide and what ever is left over will be used for the shelves. The actual dimension will be 16" - (2 * saw kerf).

1/2" Plywood

The shoe shelves don't need to be very strong. 1/2" plywood will be sufficient given the span and weight  they will hold. So to save money and space I'm using 1/2" plywood for the shoe shelves. Cut in center of  2'x4' sheet to make 2 equal sized pieces accounting for saw kerf.

1x4 Boards

The 1x4 boards will be used for the main supports to hold the closet organizer. The can be prefinished whole and then when cut to size the ends sanded and finished in place where exposed.

1x2 Boards

1x2 is used to support the wall end of the shoe shelves.

Step 1:  Cut and Finish

Double check the closet dimensions and cut all plywood to size and apply. Apply 3-4 coats of Polycrylic and edgeband where necessary. Some of the boards I'll cut to length and finish with 3-4 coats of Polycrylic. Avoid using oil based finishes because they can out gas for many months and make your clothes smell. Before cutting the boards to length I'll double check the stud locations and make any of the short boards that don't extend the whole wall longer than necessary so that I can attach them into at least 2 studs.

Step 2:  Assemble Double Hang Cabinet 

The lower section of the double hang can be assembled beforehand and installed in the closet as one unit.

Start by attaching the top, wall and back using pocket hole screws as shown below. The illustration shows the components upside down and backwards for ease of assembly. 


Then attach the long side using pocket screws as shown. There are also two pocket holes for screws on the back of the back piece. You'll need to cut a notch on the back of the long side so it can fit around baseboards. (not pictured)

Step 3: Install Double Hang Cabinet

Place the double hang cabinet in the desired location making sure it's plumb and level. Attach it to the wall by driving 3 to 3-1/2" wood screws through the back and side components into wall studs.

Step 4: Mark Guide Lines

Determine the high point in the floor if any using a level. From the high point, mark 2 distances on the back wall at 17-1/4" and 80-1/2" up from the floor and draw level lines at the marks.


The bottom line indicates where the top of the bottom supports will be located. The top line indicates where the bottom of the top supports will go. Since we want the top of the top support to be at 84" and we're using 1x4's as supports, we subtract 3-1/2" from 84". That way the top of the support will be where we want it but we can see the bottom of the line without having to stand on a latter when installing the top support.

Step 5: Attach 1x4 Supports

Starting with the short pieces, attach the 1x4 supports to the walls by drilling 3 to 3-1/2" wood screws through the face of the 1x4. Use 2 screws to secure to each stud for maximum strength.  Do not use drywall screws.

Step 6: Complete Bench Frame

Attach the front and center components of the bench frame using pocket holes as shown. The center supports should be no more than 12" apart.

Step 7: Attach Shelf Bottom To Shelf Side

Cut a notch at the top of the side panel to fit around the 1x4 top shelf support (3/4" x 3-1/2") and drill 2 pocket holes that will be used to attach the side to the top shelf support.


Attach the bottom of the shelving unit to the side using pocket screws as shown.


Step 8: Install the Shelving Unit

Place the shelving unit so it rests on top of the lower supports. Make sure the side support is plumb then attach it with 2 screws through the previously drilled pocket holes into the top support. Drill pilot holes and counter sinks and use 1" to 1-1/4" flat head wood screws to attach the bottom to the bottom support and bench frame.

Step 9: Install Shelves

Start by placing the top shelf on top of the top supports and shelving side. Drill pilot holes and countersinks from the top about every 12" or so using 1 to 1-1/4" wood screws. 


Next mark level lines on the side wall where you'd like to install your shelves. You can customize the placing how best suits you. 7" spacing is good for most shoes, including high tops and high heels, but you can do more or less depending on your shoe storage needs.


Now install the 1x2 shelf supports on the side wall by screwing them into studs using 3 to 3-1/2" wood screws. Make sure each support is drilled into 2 studs and that they are level back to front. You may need the supports to be longer than the shelves to accomplish this in some situations. The lines you drew previously represent where the tops of the supports should go. 


Finally place the shelves in place and secure them by predrilling and countersinking from the top for the side supports and using pocket holes into the side panel as shown.

Step 10: Mount Rod Hardware

Next we'll need to mount the flanges for the oval closet rod. Two holes need to be drilled for the 5mm pins on the back of the flange. The pins are 32mm apart on center and we need to install the flange so the top-center of the closet rod is about 1.5" down from the shelf above it and 14" away from the back wall. For a normal closet it would be 12" but for a coat closet the extra 2" accounts for coats which tend to be larger.

To accomplish this we need to drill the first hole 2" from the front of the organizer and 1 1/4" down from the top. If you have a Kreg Shelf Pin Drilling Jig and a Kreg 5mm Shelf Pin Jig Drill Bit this is very easy to do, Simple position the jig against the front of the panel using the long side and move the jig down 5/8" from the top and drill a hole in the top 2 holes of the jig. You can create a 5/8" spacer to use at all 4 locations.



Place the flanges in the holes and secure with a 1/2" screw. Cut the closet rod to length and place it in the flanges.


Step 11: Make Seat Cushion

The seat cushion is optional but in addition to making the the seat more comfortable it also elevates the seat to a more comfortable height and it discourages people from using the seat as another storage shelf.

The 3/4" plywood bottom of the seat will need to be a little shorter than the width between the wall and the shelving unit to account for the thickness of the fabric covering.

Start by cutting the foam to size. Cutting it about 1/2" wider so it overhangs the front a little will look nicer and be more comfortable. Cut a piece of batting large enough so it overhangs the foam by 1" along the front and sides of the cushion. Use spray adhesive to keep it in place on top of the foam.



Cut the cushion fabric a few inches longer than the batting so that there is enough material to wrap around the foam and plywood. Trim the corners for less bunching at the corners. 

Layer the components of the cushion upside down starting with the fabric (good face down), batting and foam (batting down) and finally the plywood bottom. Wrap the fabric neatly around the cushion and staple it to the bottom of the plywood.


Attach the cushion to the frame with pocket holes up from the inside of the seat frame.



Continue Reading